Controller Pairing Guide
Embedded Files
Identify your controller
Identify your controller
Official HOVERAir controller are no longer in production. iTshock have managed to secure a compatible controller that works best with HOVERAir.
The guide will walk you through how you can pair the shockcontroller to your HOVERAir app.
Pairing Mode
Pairing Mode
Press and hold the 2 button as indicated in red. The controller will start blinking.
Search for connection
Search for connection
Look for PG-XXXX in your phone bluetooth connection.
Go to HOVERAir app
Go to HOVERAir app
Launch your HOVERAir app and proceed to manual mode. If you are unsure if you have unlock your manual mode. Head over to this link to enable it.
More than just a HOVERAir Controller
More than just a HOVERAir Controller
You can switch to different mode by press and hold for 3 seconds the following combination shown when the controller is in off status.
To off the controller. Press and hold the "start" button for 3 seconds.
© 2024 iTshock
Page updated
Report abuse